Create a Alabama PE Stamp Stamp Below
Alabama PE Stamp Overview
PE stamps in Alabama are regulated by the Alabama Board of Licensure for Professional Engineers and Surveyors to ensure the authenticity and accountability of engineering work. In this blog post, we will summarize the key requirements for Alabama PE stamps.
Alabama Code Reference: The requirements for Alabama PE stamps are outlined in the Alabama Administrative Code, Chapter 330-X-11: Seals. This chapter covers the specific requirements for PE stamps in the state.
Stamp Size and Design - The Alabama PE stamp must meet the following size and design requirements:
| Requirement | Description |
|---|---|
| Size | The stamp shall be 1.5 inches in diameter or 1.75 inches square. |
| Design | The stamp shall bear the licensee's name, license number, and the legend "Licensed Professional Engineer." |
| State | The stamp shall include the words "State of Alabama" at the top. |
Other Important Information:
- Signing and Sealing: All final engineering documents must be signed and stamped by the licensee in responsible charge of the work.
- Electronic Signatures: The use of electronic signatures and digital seals is permitted, provided they meet the requirements set forth by the Alabama Board of Licensure for Professional Engineers and Surveyors.
- Out-of-State Licensees: PEs licensed in other states must obtain an Alabama PE license to practice engineering in Alabama and use the Alabama PE stamp on their documents.
- Stamp Ownership: The PE stamp is the property of the licensee and must be under their control. It is the licensee's responsibility to prevent unauthorized use of their stamp.
- Stamp Usage: The PE stamp should only be used on documents that have been prepared by the licensee or under their responsible charge. Misuse of the stamp may result in disciplinary action.
By adhering to these requirements, Alabama PEs can ensure compliance with state regulations and maintain the integrity of their professional work. It is essential to stay informed about any updates or changes to the Alabama PE stamp requirements by regularly reviewing the Alabama Administrative Code, Chapter 330-X-11.
For more detailed information, please refer to the official website of the Alabama Board of Licensure for Professional Engineers and Surveyors at https://www.bels.alabama.gov/.