Create a Florida PE Stamp Stamp Below
Florida PE Stamp Overview
PE stamps in Florida are regulated by the Florida Board of Professional Engineers (FBPE) to ensure the authenticity and accountability of engineering work. In this blog post, we will summarize the key requirements for Florida PE stamps.
Florida Code Reference: The requirements for Florida PE stamps are outlined in the Florida Statutes (FS) and the Florida Administrative Code (FAC). The specific sections that cover PE stamps are:
- FS Chapter 471: Engineering
- FAC Rule 61G15-23.002: Seals Acceptable to the Board
Stamp Size and Design - The Florida PE stamp must meet the following size and design requirements:
Requirement | Description |
---|---|
Size | The stamp shall be between 1 and 2 inches in diameter. |
Design | The stamp shall bear the licensee's name, license number, and the legend "Licensed Professional Engineer" or "Professional Engineer." |
State | The stamp shall include the words "State of Florida" at the top. |
Other Important Information:
- Signing and Sealing: All final engineering documents must be signed, dated, and stamped by the licensee in responsible charge of the work.
- Electronic Signatures: The use of electronic signatures and digital seals is permitted, provided they meet the requirements set forth by the FBPE.
- Out-of-State Licensees: PEs licensed in other states must obtain a Florida PE license to practice engineering in Florida and use the Florida PE stamp on their documents.
- Stamp Ownership: The PE stamp is the property of the licensee and must be under their control. It is the licensee's responsibility to prevent unauthorized use of their stamp.
- Stamp Usage: The PE stamp should only be used on documents that have been prepared by the licensee or under their responsible charge. Misuse of the stamp may result in disciplinary action.
By adhering to these requirements, Florida PEs can ensure compliance with state regulations and maintain the integrity of their professional work. It is essential to stay informed about any updates or changes to the Florida PE stamp requirements by regularly reviewing the FS and FAC sections mentioned above.
For more detailed information, please refer to the official website of the Florida Board of Professional Engineers at https://fbpe.org/.